Chapter 04 Playback; Playing Discs Or Files; Pause; Fast Forward And Fast Reverse - Pioneer BDP-3110 Operating Instructions Manual

Chapter 4
Playback

Playing discs or files

This section describes the player's main
operations. For the types of discs that can be
played, see Playable discs on page 7. For the
types of files that can be played, see Playable
files on page 9. Video, image and audio files
recorded on discs are played with the Home
Media Gallery .
1 Press  STANDBY/ON to turn on the
power.
Turn the TV's power on and switch its input
beforehand.
2 Press  OPEN/CLOSE to open the disc
tray and load the disc.
Notes:
• Load the disc with the printed side facing up.
• Several dozen seconds are required to
read the disc. Once reading is completed,
the type of disc is displayed on the player's
front panel display.
3 Press  to play the disc.
• To pause, press  during
playback.  on the player's front panel
display lights when playback is paused.
• To stop, press  during playback.
Notes:
• Some discs start playing automatically
when the disc tray is closed.
• DVD-Video discs have parental lock
features. Input the password registered in
the player's settings to unlock the parental
lock.
• For some BD-R/-RE, playback protection
is set for the disc or titles. Input the code
number set for the disc to unlock the
protection.
• Check Troubleshooting on page 38 if
video or audio signals are not being output
properly.
* If the disc menu is displayed
For some discs, the disc menu is displayed
automatically when playback starts. The
contents of the disc menu and the way to
operate differ from disc to disc.
* Resuming playback from where it was
stopped (resume playback function)
• When  is pressed during playback,
the point at which the disc stopped is
stored in the memory. When  is pressed,
playback resumes from that point.
• If the stop mode was set while playing a
slideshow of image files, playback starts
from the image file last displayed.
• To cancel the resume playback function,
press  again while playback is stopped.
Notes:
• The resume playback function is canceled
automatically in the following cases:
- When the disc tray is opened.
- When the file list window is switched.
• The resume playback function cannot be
used for some discs.

Pause

 During playback, press .
• Press . The sound will be muted.
The picture will be stop playback.
• Press  to resume the playback
again.

Fast Forward and Fast Reverse

 During playback, press  or .
• The scanning speed switches each time
the button is pressed. The speed steps
depend on the disc or file (the speed is
04
19