Pioneer BDP-3110 Operating Instructions Manual page 40

06
Problem
Multi-channel sound
is not output.
Noise can be heard
when outputting
DTS Digital
Surround signals
from the DIGITAL
OUT terminal.
After a disc is
inserted, Loading
stays displayed and
playback does not
start.
■ is displayed in file
names, etc.
HDMI CEC function
does not work.
40
Check
Are you trying to listen
to the sound of the
HDMI OUT terminal
while watching the
picture from VIDEO
output terminals?
Is HDMI Audio Out
properly set?
Is a DVI device
connected?
Is the audio output of
the connected AV
receiver or amplifier,
etc., properly set?
Is multi-channel sound
selected?
Is the connected AV
receiver or amplifier
compatible with DTS
Digital Surround?
Are there too many files
recorded on the disc?
Is the HDMI cable
properly connected?
Is HDMI CEC set to On
on the player?
Does the connected
device support the
HDMI CEC function?
Remedy
When watching the picture of VIDEO output terminals,
connect an coaxial digital audio cable or regular audio
cables to listen to the sound.
Set HDMI Audio Out to Auto or PCM.
The sound will not be output from the HDMI OUT
terminal if a DVI device is connected. Connect the
device to a DIGITAL OUT terminal or the AUDIO OUT
terminals
For some BDs, audio signals are only output from
DIGITAL OUT terminal or the HDMI OUT terminal.
Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings
of AV receiver or amplifier.
Use the menu screen or AUDIO to switch the disc's
sound to multi-channel.
If an AV receiver or amplifier that is not compatible with
DTS Digital Surround is connected to the DIGITAL OUT
terminal, set DTS Digital Surround and HDMI Surround
to PCM.
When a disc on which files are recorded is inserted,
depending on the number of files recorded on the disc,
loading may take several dozen minutes.
The characters that cannot be displayed on this player
are displayed in ■. When you are input characters via
media and peripheral equipment ,etc. The characters
which include simplified character of part or all simplified
character is no true display.
To use the KURO LINK function, connect the Flat
Screen TV, and AV system (AV receiver or amplifier,
etc.) and HD AV Converter to the HDMI OUT terminal.
Set HDMI CEC to On on the player.
• The HDMI CEC function will not work with devices of
other brands that do not support the HDMI CEC function,
even when connected using an HDMI cable.
• The HDMI CEC function will not work if devices that do
not support the HDMI CEC function are connected
between the HDMI CEC-compatible device and the
player.
• See About connections to components of other makes
supporting the HDMI CEC function on page13.
• Even when connected to a Pioneer product compatible
with the HDMI CEC function, some of the functions may
not work. Also refer to the operating instructions of the
connected device.