Qvis AMB-BL User Manual page 5


Please make sure the CCD (CMOS) component is away from the radiation of the laser beam
device. Otherwise it may result in CCD (CMOS) optical component damage.

It is recommended that the grounding studs of the product should be grounded, so to further
enhance the reliability of the camera.
6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any maintenance
work.

Do not touch the CCD (CMOS) optic component. Please use an air jet to clean the dust off the lens
surface. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.

When the camera is not in use please put the dustproof cap to protect the CCD (CMOS)
component.

Do not use volatile solvent such as the benzene, paint thinner or detergent with the ability to
abrade surfaces. It may result in lens damage or adversely affect the device's performance.
7. Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included. Contact
your local retailer/vendor ASAP if something is missing.
8. Box Contents:
Accessory Name
Network Camera Unit
Quick Start Guide
Installation Accessories Bag
12V to 24V Conversion Cable
(For AC 24V series product only)
CD
Amount
1
1
1
1
1
iv