T3000 - Rubber Foot; Mount Front Printer - Epson D-Jet 500 Installation Manual

Mount the Printers
8
Camera and LED for Front Printer
8.1.2

T3000 - Rubber Foot

Before placing the printer to the base plate, remove
the rubber foot on both sides.
8.1.3

Mount Front Printer

The printer support plate is positioned approx. 12
mm from the profile edge.
Mount the printer and tighten all screws from the
support plate. Then tighten the screws which fix the
printer to the support plate.
8-2
approx 12 mm
DJet 300-500-700 – HW Installation Manual