Frame Assembly
5
Cross-Beam Profile
Measurements for DJet 700 / 43" Version
5.3.5
First, line up the top cross section profile from the
left side as shown in the picture.
Tighten it firmly.
Then, position the second cross-profile as shown in
picture.
Note
The measurement 1475 mm is taken from the left
side of the first cross-profile to the left side of the
second cross-profile.
Tighten it firmly.
5-10
129 mm
95 mm
DJet 300-500-700 – HW Installation Manual
1475 mm
tighten firmly only
on this side
1475 mm