Editing Ip Cameras Connected To The Built-In Switch Network Interfaces - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder
Figure 2. 25 Edit IP Camera Interface - Plug-and-Play
•
Manual: You can disable the PoE interface by selecting the manual while the current channel can be
used as a normal channel and the parameters can also be edited.
Figure 2. 26 Edit IP Camera Interface - Manual
3. Click the Apply button to finish adding.
2.3.4 Editing IP Cameras Connected to the Built-in Switch
Network Interfaces
This chapter is only applicable to the DS-7600NI-SN/N and DS-7100NI-SN/N series NVR.
For DS-7600NI-SN/N and DS-7100NI-SN/N series NVR, the extra network interfaces provide a built-in switch
with plug-and-play function.
Example:
As for DS-7608NI-SN/N NVR, when you want to connect 2 online cameras and connect 6 network cameras via
built-in switch interfaces, you must disable 2 built-in switch interfaces in the Edit IP camera panel.
To add cameras for NVR via built-in switch interfaces:
Before you start:
39