User Manual of Network Video Recorder
Click Status button on the right bottom of the page.
If the network is normal the following message box pops out.
If the message box pops out with other information instead of this one, you can click Network button to
show the quick setting interface of the network parameters.
9.4.4 Checking Network Statistics
Purpose:
You can check the network status to obtain the real-time information of NVR.
Steps:
1. Enter the Network Detection interface.
Menu>Maintenance>Net Detect
2. Choose the Network Stat. tab.
Figure 9. 33 Network status checking
Figure 9. 34 Network status checking result
135