Configuring Ddns - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder
Updating the Firmware
Steps:
1. Save the upgrade file in a USB storage device and connect it to the NVR.
2. Click the Update button and select the upgrade file in the pop-up USB device file list.
You can see the current version of the WIFI firmware on the bottom of the pop-up window.
3. Click the Upgrade button to start upgrading.

9.2.3 Configuring DDNS

Purpose:
If your NVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used
for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the DDNS tab to enter the DDNS Settings interface, as shown in Figure 9. 5.
3. Check the DDNS checkbox to enable this feature.
4. Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and
HiDDNS.
•
IPServer: Enter Server Address for IPServer.
Figure 9. 4 USB Device Interface
Figure 9. 5 DDNS Settings Interface
121