Video Synchronized Recording - Yamaha Disklavier E3 Update Manual

Video Synchronized Recording

[SETUP] "AudioI/O" Connect a camcorder and a DVD recorder
By recording a song played on the Disklavier synchronized with the video
recording, later on, you can enjoy piano playback with the video. First set up
the camcorder, the DVD recorder, and the Disklavier, and then start recording
by following the procedures below.
■ Setting for Video Synchronized Recording
1
Press [SETUP] on the remote control.
The setup menu screen appears.
=SETUP MENU=
TimerPlay
MIDI
2
Select "AudioI/O" with the cursor buttons ([
[ ]), then press [ENTER].
The audio I/O setting screen appears.
3
Select "OMNI IN" with the cursor buttons ([
press [+/YES] and [–/NO] to change setting to "AutoDetect".

Continued to next page
(1/2)
AudioI/O
M-Tune
=SETUP MENU= (1/2)
TimerPlay AudioI/O
MIDI M-Tune
-+
=AudioI/O=
OMNI IN=AutoDetect
OMNI IN Vol=100
=AudioI/O=
OMNI IN=AutoDetect
OMNI IN Vol=100

For details on video synchronized
playback, see "Video Synchronized
Playback" on page 9.
] [ ] [ ]
] [ ]), then
-+
5