Video Synchronized Playback - Yamaha Disklavier E3 Update Manual

Video Synchronized Playback

You can enjoy piano playback with the video recorded on the DVD recorder.
1
Perform the video synchronized recording in advance.
2
Make sure that the OMNI IN setting is set to "AutoDetect".
3
Turn down the volume completely on the TV if you connect
the audio output of the DVD recorder to the TV.
Turn down the volume completely on the camcorder if you use the
camcorder only.
4
Start playback on the DVD recorder.
Start playback on the camcorder if you use the camcorder only.
The Disklavier automatically searches and selects the song paired
with the video, and then starts playback as well.
Memory (SYNC)SO V+00
A01-005
IANO005.MID
<00:03>

For details on video synchronized
recording, see "Video Synchronized
Recording" on page 5.
Note:
Be sure to rewind the video cassette to
locate the beginning of the recording.
It may take some time before piano
playback starts if you start playback
halfway through the video.
Note:
When using the song copied to the
USB flash memory, it may take some
time until the Disklavier recognizes the
information for synchronization.

See "Setting for Video Synchronized
Recording" on page 5.

If the piano playing is not
synchronized with the video picture,
adjust the offset time for
synchronization. See "Setting the
Disklavier for Audio Data Reception/
Transmission" on page 10.

If noises (synchronized signal) are
heard during video synchronized
playback, turn down the signal level
and re-record. See "Setting the
Disklavier for Audio Data Reception/
Transmission" on page 10.
Note:
You cannot operate the Disklavier
using the control unit or remote control
during video synchronized playback. If
you want to stop playback of the song,
stop playback on the DVD recorder (or
the camcorder).
9