Video Synchronized Recording - Yamaha Pro IV Series Operating Manual

CHAPTER 4: Recording
3
Tap on
4
Tap on the desired part (
, or
setting (to be recorded/overwritten).
Each time you tap on the part, its setting changes as
follows showing the status with the color of the part
icon:
Not record (white)/Not overwrite (green) ↔
Record/overwrite (red)
Tip:
You can also overwrite the previously
recorded part along with the blank part.
5
Press to start, and then
immediately pause recording.
6
Confirm that [Recording] appears in
the information area, and then start
playing the Disklavier.
The Disklavier starts recording.
7
Press to stop recording, and then
tap on
record as a new song) to complete the
recording.
To cancel the recording, tap on
47
, and then on
.
,
) to select its
(to overwrite) or
Video Synchronized
Recording
By recording a song played on the Disklavier
synchronized with the video recording, later on, you can
enjoy piano playback with the video. (→ pg. 38 "Video
Synchronized Playback") First set up the camcorder and
the Disklavier, and then start recording by following the
procedures below.
Setting Up the Camcorder and the
Disklavier
1
Hook up a camcorder to the I/O
Center.
Camcorder
I/O Center
2
(to
Tap on
and then
.
To MIC/LINE input
RCA cord
(not
To audio
supplied)
output
(L/R)
in the [Main] screen,
.
For normal use, the
adjustment of this
option is not required.
Adjusts the length of
the offset time that
leads the actual
playback of entire
recording.