Toyota 4RUNNER 2010 Quick Reference Manual page 527

Brake fluid
■
Checking fluid level
■
Adding fluid
Make sure to check the fluid type and prepare the necessary item.
Fluid type
Item
■
Refilling brake fluid
Vehicles without a smart key system
STEP 1
Turn the engine switch off.
Vehicles with a smart key system
Turn the "ENGINE START STOP" switch off.
Depress the brake pedal more than 40 times.
STEP 2
Remove the reservoir cap by hand. Add brake fluid up to the
STEP 3
"MAX" line.
If you do not follow the procedure above, the reservoir may over-
flow.
CTH43AS120
FMVSS No.116 DOT 3 or SAE J1703 brake fluid
Clean funnel
I n f o r ma t i o n P r o v i d e d b y :
4-3. Do-it-yourself maintenance
The brake fluid level should be
between the "MAX" and "MIN"
lines on the tank.
MAX
MIN
4
505