Toyota 4RUNNER 2010 Quick Reference Manual page 252

Hide thumbs Also See for 4RUNNER 2010:
Table of Contents

Advertisement

2-4. Using other driving systems
Shifting from L4L to H4L
Stop the vehicle completely.
STEP
1
Shift the shift lever to N.
STEP
2
STEP
3
The four-wheel drive control switch can be operated when
The "ENGINE START STOP" switch is in IGNITION ON mode.
When the four-wheel drive control switch is turned to L4L
VSC and TRAC (TRC) are automatically turned off.
If the center differential lock indicator flashes
Locking or unlocking of the center differential is not complete. Drive straight
ahead while accelerating or decelerating, or drive in reverse.
If the center differential lock indicator flashes and a buzzer sounds
Locking of the center differential is not complete. Stop the wheels from slip-
ping or spinning and, if the indicator still flashes, operate the four-wheel drive
control switch again.
If the low speed four-wheel drive indicator continues to flash
The transfer mode may not successfully change. Operate the four-wheel
drive control switch again.
228
Push the "UNLOCK" button and
turn the four-wheel drive control
switch to H4L.
Maintain this condition until the
low speed four-wheel drive indi-
cator goes off.
CTH24AS051
I n f o r ma t i o n P r o v i d e d b y :

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 4runner

Table of Contents