Toyota 4RUNNER 2010 Quick Reference Manual page 522

4-3. Do-it-yourself maintenance
■
Adding engine oil
2.7 L 4-cylinder (2TR-FE) engine
4.0 L V6 (1GR-FE) engine
Make sure to check the oil type and prepare the items needed before
adding oil.
Engine oil selection
Oil quantity
(Low → Full)
Items
Remove the oil filler cap by turning it counterclockwise.
STEP 1
Add engine oil slowly, checking the dipstick.
STEP 2
Install the oil filler cap by turning it clockwise.
STEP 3
500
If the oil level is below or near
the low level mark, add engine
oil of the same type as that
already in the engine.
CTH43AS129
If the oil level is below or near
the low level mark, add engine
oil of the same type as that
already in the engine.
CTH43AS122
→P. 614
2.7 L 4-cylinder (2TR-FE) engine
1.6 qt. (1.5 L, 1.3 Imp. qt.)
4.0 L V6 (1GR-FE) engine
1.8 qt. (1.7 L, 1.5 Imp. qt.)
Clean funnel
I n f o r ma t i o n P r o v i d e d b y :