Toyota 4RUNNER 2010 Quick Reference Manual page 486

3-7. Other interior features
STEP 3
Repeat the steps above to program another device for any of
STEP 4
the remaining HomeLink
464
Test the HomeLink
by pressing the newly pro-
grammed button.
If a HomeLink
programmed for a garage door,
check to see if the garage door
opens and closes. If the garage
door does not operate, see if your
garage transmitter is of the rolling
code type. Press and hold the
programmed HomeLink
The remote control transmitter is
of the rolling code type if the
HomeLink
rapidly for 2 seconds and then
remains lit. If your transmitter is
the rolling code type, proceed to
the heading "Programming a roll-
ing code system".
®
buttons.
I n f o r ma t i o n P r o v i d e d b y :
®
operation
®
button has been
®
button.
®
indicator light flashes