Toyota 4RUNNER 2010 Quick Reference Manual page 475

Referring to the map above, press the "MODE/
STEP 3
" button to select the number of the zone you are in.
Press and hold the "SET/
STEP 4
and to exit deviation calibration mode. (If no buttons are
pressed for more than 6 seconds, the number will automati-
cally be confirmed and the display returned to normal.)
Circling calibration
Stop the vehicle in a place where it is safe to drive in a circle.
STEP 1
STEP 2
STEP 3
" button to confirm the number
If "•" appears on the left side of
the direction display, circling cali-
bration needs to be performed.
In deviation calibration mode
(→P. 452), press and hold the
"MODE/
circling calibration mode.
"•" on the left side of the direction
display will blink.
Drive the vehicle at 5 mph (8 km/
h) or less in a circle until a direc-
tion is displayed.
If there is not enough space to
drive in a circle, drive around the
block until a direction is dis-
played.
I n f o r ma t i o n P r o v i d e d b y :
3-7. Other interior features
" or "SET/
" button to change to
3
453