Table of Contents
Advertisement
3.2.5 Setup Conversion
With the X and Y offset values the print is positioned
in the page.
Note
A Page Setup for the DJet system needs a paper
lead for the Front Page of +150mm in the Y axis (1).
The value of 150mm is mandatory.
Select the paper roll width here (2) .
Parameter name
Offset X [mm]
Offset Y [mm]
Orientation ( F )
Page adjustment (left,
centre, right)
Scaling X [%]
Scaling Y [%]
Directory path and file name (3)
Parameter name
Path Page Setup
Page Setup
Setup numeric ID
Button Save
Button Open
Installation Manual – Configuration DJet Software
Function
Moves the bitmap data in the X-axis (horizontal) on the page
Moves the bitmap data in the Y-axis (vertical) on the page
Turns the bitmap by 90, 180 and 270 degrees, including mirroring.
Select the bitmap alignment to left, centre or right. The centre position is
recommended. (control right of the orientation control "F")
Scales the bitmap data in X-axis (print head direction)
Scales the bitmap data in Y-axis (paper feed direction)
Function
Directory where the page setups are stored
Page Setup name
Each Page Setup uses a unique ID. Choose for each one a number between 0 to
99
Stores the Page Setup settings
Opens an existing Page Setup
Software Configuration
DJet Setup
3
3-5
Advertisement
Table of Contents
