Modify Pin - Geemarc AMPLIDECT 280 User Manual

ADVANCED FUNCTIONS

Modify PIN

This function allows you to change the PIN number of the
currently active Base. The default PIN is 0000.
1. Perform steps 1 and 2 of paragraph "Terminate HS".
2. Use the or key to choose Modify PIN
menu, press the Select soft key.
3. The display shows "PIN?". Enter the current PIN, then
press the Next key. If the old PIN code is validated, you
will be prompted to enter a new PIN code. If the old PIN
is not validated, a warning beep will sound and you will
be returned to the Modify PIN menu.
4. Enter the new PIN, press the Next key. You will be
requested to confirm the PIN code. Enter the new PIN
again then press the Save soft key to confirm and exit.
BS Reset
This function allows you to reset the Base setting to the
factory default.
1. Perform steps 1 and 2 of paragraph "Terminate HS".
2. Press the or key to choose BS Reset
menu, press the Select soft key. You will be prompted to
enter the PIN code.
50