BASIC FUNCTIONS
Receiving a Call
When a call is received, the New Call information will
appear.
If the caller can be identified, the caller's phone number is
displayed. If the caller cannot be identified, only the New
Call information displays. If you have a voice message,
the
icon and "MSG WTG ON" will be shown on the
LCD.
1. To answer the call, press the
activated the Auto Answer function, when the handset is
on the base, simply lift it up to answer.
2. You can speak. To end the call, either press the
key or replace the handset on the base.
Result: After you hang up the call, the LCD displays the
call duration.
Notes:
•
You can select the ringer volume by using the Vol +/-
key when the phone rings with an incoming call.
•
If you want to delete the
key in standby mode, then press and hold the
key. After that press the
standby mode. (The handset must be registered to
the base.)
key. If you have
icon, press the
key to return to
23