Hs Settings - Geemarc AMPLIDECT 280 User Manual

ADVANCED FUNCTIONS
3. Enter the PIN code (the default PIN is 0000), then
press the Reset soft key. If the PIN code is validated all
Base settings will be returned to the factory default,
otherwise the settings will remain.
Result: After resetting, the base will be reset and the
handset will return to Standby mode.

HS Settings

Setting Alarm
You are able to set the alarm on the handset and adjust
the alarm settings.
1. Press the Menu soft key.
2. Press the or key to choose HS Settings,
then press the Select soft key.
3. Press the Select soft key to choose Alarm menu.
4. The display shows the current set. Use the or
key to select On/Off, press the Select soft key.
5. If you select On, the display indicates you to enter the
time in HH:MM format. Use the numeric keypad to enter.
51