Basic Functions; Making A Call - Geemarc AMPLIDECT 280 User Manual

BASIC FUNCTIONS

All descriptions in this manual assume that the handset is
in standby mode. Set the telephone to standby mode by
pressing the key.

Making a Call

1. Pick up the handset and press the key.
Result: The icon appears on the LCD.
2. Dial a telephone number.
Note: You can store up to 10 telephone numbers in 4 direct
memory for automatic dialing.
3. To end the call, either press the key or replace
the handset on the base.
Note: To make a call to the last number you dialed, use the
Redial feature. For details, see page 26.
You can enter the desired phone number in standby
mode, which allows you to make corrections before
dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits). Check it.
You can also use the key to insert a pause.
Note: If you make a mistake while entering a number, press
the Erase soft key to clear the last digit.
2. When the number appears correctly, press the
key.
22