Mitsubishi SCM40ZJ-S Service Manual page 224

7.2 Models SCM100ZJ-S1, 125ZJ-S1
Fan and fan motor (FMo1)
1.Loosen 4 screws and remove
the fan grille.
2. Loosen the nut and remove
the fan propeller.
3. Remove the service panel.
4. Detach the clamps and cut
off the strap.
5. Disconnect the connector
of CNFAN1.
6. Pull out the cable of fan
motor through the grommet
on the partition.
Nut
Grommet
Strap
223
- -
Clamps
CNFAN1
'11 • SCM-SM-110
Screws
Screws
Clamp