Mitsubishi SCM40ZJ-S Service Manual page 15

(e) Multi-directional Air Flow (up/down air scroll and left/right air scroll) 〔SRK71ZK-S only〕
Activating both up/down air swing and left/right air swing at the same time results in a multi-directional air flow.
Up/down air scroll
In COOL, DRY and FAN operation
Stops at this position
for 5 seconds.
Thick line : moves quickly
Thin line : moves slowly
S SRF series
Control the flap by AIRFLOW
(a) Flap
Each time when you press the AIRFLOW
(Flap stopped)
Angle of Flap from Horizontal
Remote controller
display
COOL , DRY, FAN
HEAT
(b) Swing
1)
Swing flap
Flap moves in upward and downward directions continuously.
In HEAT operation
Approx.44°
Approx.5°
(c) Memory flap (Flap stopped)
When you press the AIRFLOW button once while the flap is operating, it stops swinging at the position. Since this angle is mem-
Approx. 45°
orized in the microcomputer, the flap will automatically be set at this angle when the next operation is started.
(d) When not operating
Approx. 75°
The flap returns to the position of air flow directly below, when operation has stopped.
In HEAT operation
Stops at this position
for 5 seconds.
 
(UP/DOWN) button on the wireless remote controller.
 
(UP/DOWN) button the mode changes as follows.
Approx. 60° Approx. 50°
Approx. 44° Approx. 32°
In COOL, DRY, FAN operation
Approx.60°
Approx.12°
Approx.
5°
Approx. 60°
Left/right air scroll
In COOL, DRY and FAN operation
Left louver Right louver
(Swing)
Approx. 38° Approx. 21.5°
Approx. 21.5° Approx. 12°

- -
'11 • SCM-SM-110
In HEAT operation
Approx. 12°
Approx. 5°