Installation Requirements - Bosch 940 ESO Installation Manual

3

Installation requirements

3.1 Specialized tools
The following specialized tools may be required for
installation:
• Manometer
• Multi-meter
• Combustion Gas Analyzer.
3.2 Introduction
Please follow these instructions. Failure to follow
instructions may result in:
B Damage or injury.
B Improper operation.
B Loss of warranty.
If you are unable to perform the tasks required to install
this heater properly, please contact a locally licensed
plumber or gas technician.
3.3 Proper location for installing your
heater
Carefully select the location of the water heater. For
your safety and for proper heater operation, follow the
guidelines below:
B 1. Locate the heater where gas and plumbing
connections are feasible and convenient.
B 2. The hot water lines should be kept short and
insulated to save energy. Centrally locating the water
heater is recommended to keep hot water
distribution times even throughout the structure.
Warning: The water in this water
heater is cold and always remains cold
except for the times the burner is on. In
the event of
conjunction with freezing temperatures,
it is recommended that the heater be
drained.
See chapter 9.2, page 32 "Winterizing"
for draining instructions.
Flammable
Warning:
gasoline, pressurized containers, or any
other items or articles that are potential
fire hazards must NOT be placed on or
adjacent to the heater. The appliance
area must be
combustible materials, gasoline and
other flammable vapors and liquids.
6 720 644 956
power outage in
materials,
kept free of all
Installation requirements
9