Smart Function Key (Nr Key); One Touch Eco Mode - Panasonic KX-TG6821AL Operating Instructions Manual

3
Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing *.
4
MOKN a MeN
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Smart Function Key (NR
key)
The Smart Function Key (NR key) is located
on the bottom of the handset and informs you
with its flashing to allow you to activate the
following features by simply pressing this key.
n When the NR indicator flashes rapidly,
you can:
– Answer the call (outside call, intercom).
(page 17, 44)
– Stop the alarm sound. (page 29)
– Stop paging. (page 44)
n When the NR indicator flashes slowly in
standby mode, you can:
– Listen to new messages. (page 38)
– View the caller list when there are
missed calls. (page 35)
To activate these features, their Smart
Function Key must be "On". (page 15)
Using the Smart Function Key
(NR key)
When the NR indicator flashes rapidly/slowly,
press M N.
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
Function Key, the speakerphone is
activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
Note:
R While key lock is on (page 19), incoming
calls can be answered, but the following
features are disabled even when the NR
indicator flashes slowly.
– Listen to new messages. (page 38)
– View the caller list when there are
missed calls. (page 35)
Setting the Smart Function Key
The Smart Function Key for the following
features must be "On".
– "New Message" (Default: On)
– "Missed Call" (Default: Off)
The settings can be set for each handset.
1
M N#278
2
MbN: Select the desired setting and press
M N.
R " " is displayed next to the selected
features.
R To cancel a selected feature, press
M N again. " " disappears.
3
MOKN a MeN
Note:
R If the NR indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.

One touch eco mode

The MR/ECON button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
"Normal".
Getting Started
15