Selecting Preset Sound Modes-Eq; Storing Your Own Sound Modes - JVC KD-SHX705 Instructions Manual

Selecting preset sound modes—EQ
You can select a sound mode suitable to the
music genre.
Available sound modes:
• Hard Rock / R&B / Pop / Jazz / Dance /
Country / Reggae / Classic
• User 1 / User 2 / User 3
• Flat (To cancel the sound mode)
1
While playing any source...
The Main Menu appears on
the display.
MENU
2
Move the cursor to "EQ" on the Main
Menu.
3
Enter the EQ (equalizer) Menu.
OK
BAND
The currently selected mode appears
(highlighted).
4
Select (highlight) one of the preset EQ
modes.
EX.: When "Jazz" is selected.
To exit from the Menu operation, press
MENU again.

Storing your own sound modes

You can adjust the sound modes and store your
own adjustments in memory.
1
BAND
2
Cursor
3
BAND
4
For details about the preset settings of each sound
mode, see page 47.
Repeat steps 1 to 4 on the left column to
select a sound mode you want to adjust,
then...
OK
Make adjustments as you like.
1) Press 4 ( ) or ¢ ( ) to select the
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
2) Press 5 (up) or ∞ (down) to adjust the
level of the selected band within the
range of –05 to +05.
3) Repeat steps 1) and 2) to adjust the other
frequency bands.
Finish adjustment.
OK
Select (highlight) one of the user sound
modes (User 1, User 2, or User 3) you
want to store into.
then
"Memory" appears for a while.
OK
BAND
23