JVC KD-SHX705 Instructions Manual page 49

Jvc cd receiver instructions
Hide thumbs Also See for KD-SHX705:
Table of Contents

Advertisement

• Elapsed playing time is not correct.
] This sometimes occurs during play. This is
caused by how the tracks are recorded on
the disc.
• "Not Support" appears and tracks skip.
] Tracks are not encoded in an appropriate
format.
] Copy-protected WMA tracks cannot be
played back.
• "No Files" appears for a while, then the
disc ejects.
] The current MP3/WMA disc does not
contain any MP3/WMA tracks.
• "No Music" appears.
] No MP3/WMA tracks are included in the
folder. Skip the folder.
] Only <jcl> and/or <jca> files are recorded
on the disc.
• Correct characters are not displayed (ex.
album name).
] This unit can only display a limited
number of special characters (see the
tables on page 47).
Sound adjustments
• CCC, BBE, and preset sound modes (EQ)
cannot be used.
] These sound adjustments cannot be
adjusted when "V.Cancel" is selected for
the DSP mode.
Graphics
• Download does not seem to finish.
] If you are trying to download an
animation of many frames, it takes a quite
long time (see page 46).
• Animation does not move.
] Temperature in the car compartment is
very low. Wait until the operating
temperature resumes.
Preferred Setting Modes—PSM
• You cannot select an image for "Picture"
and an animation for "Movie."
] You can select an image only after
downloading the appropriate files in
memory.
CD changer operations
• "No Magazine" flashes.
] Magazine is not loaded in the CD
changer.
• "No Disc" flashes.
] No discs are in the magazine or the discs
are inserted upside down.
• "Reset 01" — "Reset 07" flashes.
] The built-in microcomputer in the CD
changer is malfunctioning. Press the reset
button of the CD changer.
• "Reset 08" flashes.
] This unit is not connected to a CD
changer correctly. Connect this unit and
the CD changer correctly and press the
reset button of the CD changer.
49

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents