Selecting Preset Sound Modes (C-Eq: Custom Equalizer) - JVC KS-FX480 Instructions Manual

Selecting preset sound modes
(C-EQ: Custom Equalizer)
You can select a preset sound mode (C-EQ:
Custom Equalizer) suitable to the music genre.
1
Press EQ.
The last selected sound mode is
recalled and applied to the
current sound.
Ex.: If you have selected "USER" previously
2
Select the sound mode you want.
Each time you press the button,
the sound modes change as
follows:
USER
JAZZ
Sound mode indicator flashes.
Ex.: When you select "ROCK"
14
Sound mode indicator flashes
ROCK CLASSIC
HIP HOP POPS
Indication For:
USER (Flat sound)
ROCK Rock or
disco music
CLASSIC Classical
music
POPS Light music
HIP HOP Funk or Rap
music
JAZZ Jazz music
Note:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
on page 15.
To store a sound mode separately for
each playback source (C-EQ Link)
You can select a sound mode and store it in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, tape
and external components.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display.
Press ¢ or 4
2
LINK (custom equalizer link)."
3
Turn the control dial clockwise to select "LINK
ON."
4
Press SEL (select) to finish the setting.
To cancel C-EQ Link, repeat the same
procedure and select "LINK OFF" in step 3.
Note:
When you change the "C-EQ LINK" setting, the
sound mode (C-EQ) is automatically reset to "USER".
Preset values
BAS TRE LOUD
00 00 OFF
+03 +01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF
to select "C-EQ