Storing Stations In Memory - JVC KD-SHX705 Instructions Manual

Storing stations in memory

You can preset 6 stations for each band.
FM station automatic presetting—SSM
(Strong-station Sequential Memory)
• This is only for FM bands.
1
Select the FM band (FM1 – FM3) you
want to store FM stations into.
OK
BAND
2
While tuning in to an FM station...
The Main Menu appears on
the display.
MENU
3
Move the cursor to "MODE" on the
Main Menu.
4
Enter the FM MODE Menu.
OK
BAND
5
Select "SSM."
6
Start SSM.
OK
Local FM stations with the
BAND
strongest signals are searched
and stored automatically in the
selected FM band.
FM1 FM2
AM FM3
Cursor
Manual presetting
Ex. Storing an FM station of 92.5 MHz into
the preset number 3 of the FM1 band.
1
OK FM1
BAND
AM
(in this example, FM1)
2
Tune in to a station
(in this example, of 92.5 MHz)
3
Display the Preset Station List of the
selected band.
Hold
• Station frequencies or assigned names
(see page 35) of the preset stations are
shown on the list.
4
Select a preset number.
(Select "3" in this example).
• If the current band is FM, you can move
to the lists of the other FM bands by
pressing 4/¢ ( / ).
5
Store the station selected in step 2 .
Hold
OK
BAND
FM2
FM3
13