Printing Or Printout Quality Problems - Epson DLQ-3500 User Manual

Printing or printout quality problems

The Paus e light is off but the printer does not print.
Cause
The interface cable is not
plugged in securely.
Your interface cable does not
meet the printer and/or
computer specifications.
Your software is not
properly set up for your
printer.
The Paper O ut and Paus e lights are on and the printer does not
print.
Cause
The printer is out of paper for
the selected paper source.
What to do
Check that both ends of the cable
between the printer and the computer
are plugged in securely. If the cable is
connected correctly, run a self test as
described in "Printing a Self Test".
Use an interface cable that meets the
requirements of both the printer and
computer. See the Setup Guide and
your computer documentation.
Make sure that your printer is properly
selected in your application software.
If necessary, install or reinstall the
printer driver software. Refer to the
Setup Guide for detailed instruction.
What to do
Make sure the correct paper source is
selected on the control panel, and load
paper in the current paper source.
Press the Paus e button to resume
printing.
-15