Setting Up Epson Status Monitor 3 - Epson DLQ-3500 User Manual

Your system is configured to support bidirectional
communication.
The EPSON Status Monitor 3 utility is installed when you install
the printer driver as described in the Setup Guide.
Note:
If you install the driver using Add Printer in the Printers folder, or using
the "Point and Print" method, EPSON Status Monitor 3 may not
function properly. If you want to use EPSON Status Monitor 3, reinstall
the driver as described in the Setup Guide.
Before using the EPSON Status Monitor 3 utility, be sure to read
the README file on the driver disk. This file contains the latest
information on the utility.

Setting up EPSON Status Monitor 3

Follow these steps to set up EPSON Status Monitor 3:
1. Open the Utility menu as described in "Using the Printer
Driver with Windows Me, 98, and 95" or " Using the Printer
Driver with Windows 2000 and NT 4.0".
-14