Epson DLQ-3500 User Manual page 84

The paper supply is not
aligned with the printer.
The paper supply is too far
away from the printer.
The holes on the sides of the
paper are misaligned.
The paper-thickness lever is
set incorrectly.
Your paper may be the
wrong size or thickness for
the printer.
The sprocket units are
positioned incorrectly for the
width of paper you are
using.
The printer does not eject your continuous paper properly.
Cause
-8
Make sure you align your paper
supply with the paper loaded in the
tractor so the paper feeds smoothly
into the printer. See "Positioning the
continuous paper supply".
Make sure that your paper supply is
within 1 meter (3 feet) of the printer.
Check that the holes on the sides of the
paper are aligned with each other.
Also make sure the sprocket units are
locked and their covers are closed.
Set the paper-thickness lever to match
the thickness of your paper. See
"Adjusting the Paper-Thickness
Lever".
Make sure that the paper size and
thickness are within the specified
ranges. See "Paper" for information
on the continuous paper
specifications.
Adjust the position of the sprockets to
remove any slack along the width of
the paper.
Note:
If paper is jammed in the paper path,
see "Clearing a Paper Jam" for
instructions.
What to do