Epson DLQ-3500 User Manual page 21

c
Caution:
Never use the tear-off function to feed continuous paper with
labels backward; they may come off their backing sheet and jam
the printer.
Using the Tear Off/Special Paper button
Follow these steps to advance continuous paper to the tear-off
position using the T ear O f f /Speci al Paper button:
1. After the printer finishes printing your document, check that
the T ear O f f /Speci al Paper lights are not flashing.
Note:
If the T ear O f f /Speci al Paper lights are flashing, the paper is
in the tear-off position. If you press the T ear O f f /Speci al Paper
button again, the printer feeds your paper to the next top-of-form
position.
2. Press the T ear O f f /Speci al Paper button. The printer
advances the paper to the tear-off edge.
Note:
If your paper's perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in "Adjusting the tear-off position".
c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the top-of-form position.
-15