Gefen ex-tend-it User Manual page 5

VGA to ADC
1-
Connect the ADC monitor to the VGA to ADC Conversion Box.
2-
Connect the power supply to the VGA to ADC Conversion Box.
3-
Connect the supplied VGA cable to the computer VGA port
and the VGA to ADC Conversion Box.
4-
Start up the computer.
5-
Observe that the power light is ON. The screen will show briefly,
then go dark and eventually come back with the proper setting.
Please allow the computer to complete its start-up cycle. (5-10 minutes)
6-
You should see a beautiful picture.
How to connect the
important
Conversion Box
4