andrews ECOflo EC230/600 Installation Manual, Operation And Maintenance Manual page 19

HORIZONTAL AND VERTICAL FLUE KITS
INSTALLATION PROCEDURE
Determine location of flue exit.
1. The Horizontal or Vertical flue kit that has been
delivered includes the components as listed below and
on page 21. The concentric flue pipe system includes
both the flue exhaust (inside pipe) and combustion air
(outside pipe). The flue pipe may be cut on the
unflared end (end without gasket) as required for
installation.
HORIZONTAL FLUE KIT/FITTINGS PACK – 230 LITRE MODELS AWH PART No: B291 SUPPLIED COMPONENTS
Part Description
Exhaust Outlet Tee c/w Condense Outlet (82500)
100mm to Concentric Exhaust Connector (75412)
Air intake Tee Piece Connector (82501)
Condense Syphon (87436)
Horizontal Flue Terminal, 100/150mm (87990)
90° Elbow c/w clamp, 100/150 (87890)
Gas Cock – ¾"BSP
Drain Valve – ¾"BSP
Drain Valve Socket – ¾"BSP
Installation, Operation and Maintenance Manual
VERTICAL FLUE KIT/FITTINGS PACK – 230 LITRE MODELS AWH PART No: B293 SUPPLIED COMPONENTS
Part Description
Exhaust Outlet Tee c/w Condense Outlet (82500)
100mm to Concentric Exhaust Pipe (75412)
Air intake Tee Piece Connector (82501)
Condense Syphon (87436)
Vertical Flue Terminal, 100/150mm (87969)
Gas Cock – ¾"BSP
Drain Valve – ¾"BSP
Drain Valve Socket - ¾"BSP
Installation, Operation and Maintenance Manual
INSTALLATION • SECTION 3
2. Determine if additional flue components are required
for installation. Refer to the flue component information
on pages 21 and 55 for available optional flue
components.
3. Ensure that the flue terminal location complies with
requirements described within this manual and the
Local Codes of Practice.
4. Measure the vertical and horizontal distance from the
water heater flue connection to determine the number
of components required.
19
Part Number
E860
E861
E862
E863
E236
E205
C498
C381
C103
E864
Part Number
E860
E861
E862
E863
E866
C498
C381
C103
E864