D-Link DWR-116 Quick Setup Manual

D-Link DWR-116 Quick Setup Manual

Wireless n300 multi-wan router
Hide thumbs Also See for DWR-116:

Advertisement

WIRELESS N300 MULTI-WAN ROUTER
DWR-116

QUICK SETUP GUIDE

* 3G/4G/LTE USB Modem

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWR-116

  • Page 1: Quick Setup Guide

    WIRELESS N300 MULTI-WAN ROUTER DWR-116 QUICK SETUP GUIDE * 3G/4G/LTE USB Modem...
  • Page 2: Accessing The Web Ui

    1. ACCESSING THE WEB UI WEB UI To access the Web UI of the DWR-116, connect your computer to the DWR-116 using the ethernet cable provided. Then connect the power cable to the DWR-116. Then simply open a browser window and enter the IP address in the browser address field: IP ADDRESS: http://192.168.0.1...
  • Page 3 2. SETUP 3G/4G/LTE CONNECTION 3G / 4G / LTE WAN Connection Once you have successfully accessed the Web UI of the DWR-116 you will need to go to the following location to configure your 3G/4G/LTE connection settings. SETUP > INTERNET Click on the Internet Connection Setup Wizard button to start the wizard, below we will go through the required settings to setup a 3G/4G/LTE connection.
  • Page 4 If you are unsure of the correct details please refer to the table on the next page for the most common settings for ISPs. Once you have entered the correct details for your connection click Next. DWR-116...
  • Page 5 TPG Mobile *99# internet Virgin *99# VirginBroadband Vodafone (PostPaid) *99# vfinternet.au Vodafone (PrePaid) *99# vfprepaymbb WestNet *99# splns555a1 iiNet *99# iinet Vodafone *99# vfinternet.au New Zealand 3G/4G LTE Providers Provider Dialed Number Telecom NZ *99# internet.telecom.co.nz Vodafone *99# live.vodafone.com DWR-116...
  • Page 6 2. Cont... 3G / 4G / LTE WAN Connection Click on Connect to make the changes effective immediately. You should now have an active Internet Connection and see a similar screen as shown above. DWR-116...
  • Page 7: Troubleshooting

    - Press and hold the reset button on the rear of the device for 10 seconds. The reset process will take up to 60 seconds to complete before you can access the DWR-116 again. Note: Resetting the router to factory default will erase the current configuration settings. To re- configure your settings, log into the router as outlined in question 1, then run the Setup Wizard.
  • Page 8: Year Limited Warranty

    WIRELESS NETWORK REMINDER Wireless Network Name (SSID) Wireless Network Password 3-YEAR LIMITED WARRANTY AUSTRALIA NEW ZEALAND Technical Support: Technical Support: http://support.dlink.com.au http://support.dlink.co.nz 1300 766 868 0800 900 900 Ver. 1.00(AU) _130x183 2014/05/05 150303-0372...

Table of Contents