Ford 2013 C-Max Full Hybrid Owner's Manual page 339

3. Remove the tube cap and fasten the metal connector of the tube to
the tire valve, turning clockwise. Make sure the connection is tightly
fastened.
5. Remove the warning sticker found on the canister and place it on the
top of the instrument panel or the center of the dash.
6. Note: Start the engine only if the vehicle is outdoors or in a
well-ventilated area.
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 1st Printing
USA (fus)
Wheels and Tires
4. Plug the power cable into the
12-volt power point in the vehicle.
7. Push and turn dial (A)
counterclockwise to the sealant
B
position. Turn on the kit by pressing
the on button (B).
A
8. Inflate the tire to the pressure
listed on the Tire Label located on
the driver's door or the door jamb
area.
339