Table of Contents
Advertisement
CONFIGURATION
Setting Video Input for Video Capture Card
NOTE: A Blackmagic Design card is shown in this procedure.
Before attempting to use a video input from a BlackMagic video capture card, it will be necessary to configure the
card for the type of video signal that it will be receiving. This configuration is done outside the Mbox Studio software.
To configure video capture card:
Step 1. Quit Mbox Studio application, if running.
Step 2. At Apple menu, select System Preferences.
Step 3. At System Preferences window, click on Blackmagic Design button.
Note:
Mbox Studio v3.6 will work with Blackmagic
Design
software version 8.0 and higher.
®
144
MBOX
MEDIA SERVER USER MANUAL
Advertisement
Table of Contents
