Setting Up Dynamic Dns - Pace 921VNX User Manual

To configure a NAT rule:
 Indicate an application name
 Select the protocol type: TCP or UDP
 Enter the port that has to be forwarded to the internal service
 Indicate the address of the hardware on the local network, followed by the destination port.
The request will be forwarded to this private address

Setting up Dynamic DNS

The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname,
allowing users whose ISP does not assign them a static IP address to use a domain name. This is
especially useful for hosting servers via your DSL connection, so that anyone wishing to connect
to you may use your domain name, rather than having to use your dynamic IP address, which
changes from time to time. This dynamic IP address is the WAN IP address of the router, which is
assigned to you by your ISP.
You will first need to register and establish an account with the Dynamic DNS provider using their
website, for example http://www.dyndns.org/
16 | P a g e