Motorola RFS7000 Series Troubleshooting Manual page 45

3.3 KERN Messages (Continued)
Module
psp.c
psp.c
psp.c
psp.c
psp.c
ps_wisp.c
ps_wisp.c
ps_wisp.c
ps_wisp.c
ps_wisp.c
ps_wisp.c
ps_wisp.c
ratescale.c
ratescale.c
ratescale.c
Message
PKT_ERR( ""dtim poll: recvd
bad bss index"" );
PKT_WARN( ""pspoll: psp bit
not set"" );
PKT_INFO( ""psp:mu
""MACSTR"" authenticating"",
MAC2STR( mu_ptr->cfg.addr )
);
PKT_INFO( ""psp:free mu
queue"" );
PKT_INFO( ""psp:free portal
queues"" );
PKT_WARN( ""radio
""MACSTR"" lost first frag of
seq %04x till %04x"",);
PKT_WARN( ""radio
""MACSTR"" lost seq %u to
%u"",);
PKT_WARN( ""warning:
unable to queue skb"" );
PKT_INFO( ""warning: rx wisp
data from unknown portal"" );
PKT_INFO( ""ps_rx_from_cc:
no portal to queue to"" );
PKT_ERR( ""%s : CC sending
data pack to unknown MU"",
__FUNCTION__ );
PKT_INFO( ""ps_rx_from_cc:
packet failed encryption"" );
PKT_ERR( ""%s : curr = %d
allowed = %x"",
__FUNCTION__,);
PKT_ERR( ""ratescale : no
highest rate = %x"",
allowed_rates );
PKT_INFO( MACSTR""
rate[%s to %s], [%d/%d],
pct:%d"",);
Network Events & Kern Messages
Description
Received a DTIM poll with
bad BSS index.
Received a PSP poll from the
MU, but the PSP bit is not set.
A station with the given MAC
address is in the process of
authentication.
Free PSP queue for MU.
Free radio PSP queue.
Missed WISP packet for given
sequence range.
Missed WISP packet for given
sequence range.
Failed to switch a packet from
a radio to the CC.
Received a WISP data packet
from an unknown portal.
Received a packet from the
CC, but there is no radio to
send to.
Received a packet from the
CC, but the intended MU is
unknown.
Failed to encrypt a packet
from the CC.
Tried to get to a lower or
higher rate beyond the
allowed rate for a MU.
It is already in the highest rate
setting.
Ratescale is a switch from old
rate to new rate.
3-23