Motorola RFS7000 Series Troubleshooting Manual page 32

3-10 Network Events
3.2 Network Event Course of Action Lookup (Continued)
ID Event Description
35 WLAN max MU This is an incorrect message. It is not really the
count reached ACL that denied association; it is really that the
802.11 limit has been exceeded.
36 Mgt user auth Management user not authenticated on the
failed [radius] switch's local user database.
Management user not authenticated on the
remote RADIUS server database.
37 Mgt user auth [UNUSED]
rejected
38 Mgt user auth Management user successfully authenticates on
success [radius] the switch's local user database.
Management user successfully authenticates on
the remote RADIUS user database.
39 Radius server
timeout
40 KDC user [added]
41 KDC user
[changed]
42 KDC user [deleted]
43 KDC DB replaced
44 KDC propagation Host name is unknown.
failure
45 WPA counter- The switch will be "down" for a short length of
measures [active] time and then come back up to re-associate MUs.
46 Primary lost The Primary switch in Standby mode did not
heartbeat receive monitoring heartbeats from the Standby
switch.
47 Standby active The Standby switch has changed its state from
Monitoring to Active.
48 Primary internal
failure [reset]
49 Standby internal
failure [reset]
Possible Course of Action
Check your Radius server
configuration on the switch.
If this event occurs but failover does
not occur, then there is possible
congestion on the network causing
the heartbeats to be lost. Also, look
for other events prior to the lost
heartbeats that might indicate a
problem, such as Ethernet port
disconnected.
A failover has occurred.