Motorola RFS7000 Series Troubleshooting Manual page 25

3.1 Network Event Message/Parameter Description Lookup
ID Event Message
16 AP detected Detected a new access port <XX>.
17 Device msg Dropping DeviceInfo message from <XX>
dropped [info] whose parent is <YY>.
debug
18 Device msg Dropping Loadme message from <XX>
dropped [loadme] whose parent is <YY>.
19 Ether port Ethernet Port <XX> is connected.
connected
20 Ether port Ethernet port <XX> disconnected.
disconnected
21 MU assoc failed ACL denied MU (XX) association.
[ACL violation]
22 MU assoc failed Access port refused MU <XX> association.
Error <YY>.
23 MU status Mobile Unit <XX> was associated to access
[associated] port <YY>.
24 MU status Mobile Unit <XX> with MAC <YY> roamed
[roamed] from access port <ZZ> to (Name of the
access port to which the Mobile Unit
roamed).
25 MU status Mobile Unit <XX> with MAC address <YY>
[disassociated] was disassociated. Reason code <ZZ>.
26 MU EAP auth MU <XX> failed to authenticate with
failed RADIUS server.
27 MU EAP auth Mobile unit <XX> successfully
success authenticated with EAP type <YY>,
authentication valid for <ZZ> minutes.
Network Events & Kern Messages
Parameters
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
switch to which the access port is adopted.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
switch to which the access port is adopted.
XX = Ethernet port number 1 or 2.
XX = Ethernet port number 1 or 2.
XX = MU MAC (xx:xx:xx:xx:xx:xx) address.
XX = Wireless client MAC (xx:xx:xx:xx:xx:xx)
address.
<YY> = Reason code number (integer).
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
MU.
YY = Name (string) of the access port.
XX = Name (string) of the MU.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
MU.
ZZ = Name (string) of the access port the
MU roamed from.
XX = Name (string) of the mobile unit.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
mobile unit.
ZZ = Reason (integer) code number.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
mobile unit.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
mobile unit.
YY = EAP (integer) type
ZZ = number (integer) of minutes.
3-3