Motorola RFS7000 Series Troubleshooting Manual page 24

3-2 Network Events
3.1 Network Event Message/Parameter Description Lookup
ID Event Message
6 AP adopt failure This event and message is currently not
[acl disallow] configured. It will be configured in the next
service release.
7 AP adopt failure Access port <XX> was not adopted because
[limit exceeded] maximum limit has been reached.
8 AP adopt failure License denied access port <XX> adoption.
[license disallow] Maximum access ports allowed with
current license = <YY>.
9 AP adopt failure Access port with MAC <XX> can not be
[no image] adopted because no valid firmware image
file can be found.
10 AP status [offline] Access port <XX> with MAC address <YY>
is unavailable.
Taking access port <XX> with MAC address
<YY> offline.
11 AP status [alert] Access port <XX> with MAC address <YY>
is in Alert status due to country not set.
Access port <XX> with MAC address <YY>
is in Alert status.
12 AP status Adopted an access port <XX>.
[adopted]
Radio <XX> with Mac <YY> is adopted.
13 AP status [reset] Radio <XX> with MAC <YY> was reset.
Reset the access port <XX>.
14 AP config failed Radio <XX> <YY> no ESS - configuration
[wrong ESS] FAIL.
15 AP max MU count MUs for this RF port are over margin: <XX>.
reached
Parameters
Not applicable.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = License Level (integer).
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
XX = Access port name (string).
YY = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
XX = Access port name (string)
<YY> = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Access port name (string).
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Name (string) of the radio.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
radio.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
XX = Name (string) of the radio.
YY = MAC (xx:xx:xx:xx:xx:xx) address of the
radio.
XX (integer ) = Number of MUs associated
to this access port.