Download Print this page

Black & Decker GTC2451 User Manual page 8

Cordless hedgetrimmer
Hide thumbs Also See for GTC2451:

Advertisement

E N G L I S H
In case of skin or eye contact, follow the
N
instructions below.
The battery fluid, a 25-30% solution of
potassium hydroxide, can be harmful. In
case of skin contact, immediately rinse
with water. Neutralise with a mild acid
such as lemon juice or vinegar. In case of
eye contact, rinse abundantly with clean
water for at least 10 minutes.
Consult a physician.
Fire hazard! Avoid short-circuiting the
contacts of a detached battery (e.g. when
storing the battery in a toolbox).
Do not incinerate the battery.
Do not attempt to charge damaged
batteries.
Chargers
Use your Black & Decker charger only to
N
charge batteries of the type supplied with your
tool. Other batteries could burst, causing
personal injury and damage.
Never attempt to charge non-rechargeable
N
batteries.
Have defective cords replaced immediately.
N
Do not expose to water.
N
Do not open the charger.
N
Do not probe the charger.
N
Intended for indoor use only.
Additional safety instructions for hedgetrimmers
Wear safety goggles when operating this
tool.
Wear gloves when operating this tool.
8
Do not expose the tool to rain or high
humidity.
Do not carry the tool with your hands on the
N
front handle switch or the trigger switch unless
the battery has been removed.
If you have not used a hedgetrimmer before,
N
preferably seek practical instruction by an
experienced user in addition to studying this
manual.
Never touch the blades while the tool is running.
N
Never attempt to force the blades to come to
N
a standstill.
Do not put the tool down until the blades have
N
come to a complete standstill.
Regularly check the blades for damage and
N
wear. Do not use the tool when the blades are
damaged.
Take care to avoid hard objects (e.g. metal
N
wire, railings) when trimming. Should you
accidentally hit any such object, immediately
switch the tool off and check for any damage.
Should the tool start to vibrate abnormally,
N
immediately switch it off and check for any
damage.
If the tool stalls, immediately switch it off.
N
Remove the battery before attempting to
remove any obstructions.
After use, place the blade sheath supplied
N
over the blades. Store the tool, making sure
that the blade is not exposed.
Always ensure that all guards are fitted when
N
using the tool. Never attempt to use an
incomplete tool or a tool with unauthorised
modifications.
Never allow children to use the tool.
N
Be aware of falling debris when cutting the
N
higher sides of a hedge.
While operating the machine always be sure of
N
a safe and secure operating position especially
when using steps or a ladder.
ELECTRICAL SAFETY
Your charger has been designed for a specific
mains voltage. Always check that the mains voltage
corresponds to the voltage on the rating plate.

Advertisement

loading

This manual is also suitable for:

Gtc610Gtc610nm