Advertisement

GTC650L
www.blackanddecker.co.uk

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker GTC650L

  • Page 1 GTC650L www.blackanddecker.co.uk...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker hedgetrimmer has been designed for protected supply. Use of an RCD reduces the risk of trimming hedges, shrubs and brambles.
  • Page 5 ENGLISH (Original instructions) c. Disconnect the plug from the power source and/or Additional power tool safety warnings the battery pack from the power tool before making any adjustments, changing accessories, or storing Warning! Additional safety warnings for hedge power tools. Such preventive safety measures reduce trimmers the risk of starting the power tool accidentally.
  • Page 6 ENGLISH (Original instructions) ♦ Always ensure that all guards are fitted when using the Residual risks tool. Never attempt to use an incomplete tool or a tool Additional residual risks may arise when using the tool which with unauthorised modifications. may not be included in the enclosed safety warnings.
  • Page 7 ENGLISH (Original instructions) Assembly Warning! Never attempt to replace the charger unit with a regular mains plug. Warning! Before assembly, remove the battery from the tool. ♦ Use your Black & Decker charger only to charge the battery in the appliance/tool with which it was supplied. Fitting and removing the battery (fig.
  • Page 8: Maintenance

    ENGLISH (Original instructions) ♦ Consider purchasing a spare battery to extend the Charger diagnostics running time of this tool. The catalogue number of the If the charger detects a weak or damaged battery, the battery is found in the technical data chart below. charging indicator (9) will flash red at a fast rate.
  • Page 9 You can check the location of your nearest authorised repair Technical data agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of GTC650L H1 authorised Black & Decker repair agents and full details of our Input voltage Vdc 18 after-sales service and contacts are available on the Internet at: www.2helpU.com.
  • Page 10: Ec Declaration Of Conformity

    To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can GTC650L check the location of your nearest authorised repair agent Black & Decker declares that these products described under by contacting your local Black &...
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual is also suitable for:

Gtc650l-xeGtc650l h1

Table of Contents