Drive Chain - BOMBARDIER Elan Shop Manual

SECTION 02
SUB-SECTION 09 (DRIVE CHAIN)
DRIVE CHAIN
GENERAL
There are three (3) types of the Bombardier drive
chains; a
single 1/2" pitch, a double 3/8" pitch,
and a tri-
ple 3/8" pitch. For proper use refer to Technical Data.
1/2" SINGLE
3/8" DOUBLE
CHAIN SEPARATION
When separating an endless chain, always use a chain
bearing pin extractor. Also, make sure to remove one
complete link.
112" SINGLE LINK
3/8" TRIPLE
There are two (2) variations of chains; detachable and
endless.
CHAIN ATTACHMENT
3/8" TRIPLE LINK 3/8" DOUBLE LINK
When joining chain ends, the open end of the circlip must be on opposite side of chain rotation. The circlip should
also be facing the outer side of chaincase.
tR1
~ij
Q
~ ~O
~CirCliP
CONNECTING LINK 3/8" DOUBLE
112" SINGLE 3/8" TRIPLE
(DRIVE CHAIN), PAGE 1