MTU 12 V 2000 M72 Operating Instructions Manual page 19

Open-loop control:
• Injection (fuel pressure, injection timing, injection duration, operating status)
• Sequential turbocharging (cutting-in and out) with secondary turbocharger
• Engine protection with multi-stage safety systems:
• Power reduction
• Power limitation
• Emergency stop
Monitoring:
• Exhaust gas temperature, A-side
• Exhaust temperature, B-side
• Engine speed
• Oil pressure
• Differential oil pressure
• Coolant temperature
• Coolant level
• Exhaust turbocharger speed
• Leak fuel level
• Oil temperature
• Coolant pressure
• Fuel pressure after filter
Monitoring in engine room
Engine control and monitoring unit (LOP)
Functions:
• Engine speed, oil pressure and coolant temperature are monitored and displayed
• Integrated safety system
• Integrated test system
• Redundant CAN bus interface to governor and higher-level control and monitoring system
• 24 V DC power supply
M015650/03E 2011-10 | General Information | 19