16.
Tighten nut (3) to specified tightening torque using a torque wrench.
Name
Nut
17.
Fit seal (10).
18.
Install cover.
19.
Install screw (1), washer (2) and nut (9).
20.
Tighten nut (9).
21.
Open ball valve at the inlet and outlet of the fuel treatment system.
Result:
The fuel treatment system is ready for operation.
130 | Task Description | M015650/03E 2011-10
Size
Type
M16
Tightening torque
Lubricant
Value/Standard
(Engine oil)
30 Nm +3 Nm