Table of Contents
Advertisement
Appendix A. Cable and connector
specifications
IMPORTANT NOTE
The maximum cable lengths supported vary widely between devices and
cables. It may be possible to use cables that are longer than those specified
below with certain computers and peripherals but this cannot be guaranteed. If
you experience problems try using shorter cables.
A1. Keyboard, monitor and mouse to AdderView MP
All of the shared devices plug directly into the relevant ports at the rear of the
AdderView MP. If you use a PC AT style keyboard you will need an AT (5 pin DIN
female) to PS/2 (6 pin mini-DIN male) converter.
Cable specification (self-powered operation):
Keyboard, monitor and mouse cables should be no longer than 2 metres.
Cable specification (with optional power adapter):
Keyboard, monitor and mouse extension cables can be used to increase the
distance from AdderView MP up to 10m. Most keyboards and mice will also operate
at distances of 20 metres.
AdderView MP
Installation and Use
Page 39
Advertisement
Table of Contents
