Table of Contents
Advertisement
matching-work.
7.
If fail to match, please repeat above step 2, 3, and 4 to reset.
Advance Networking Setting
At present support one scanner with two receivers networking mode
(hereinafter referred to as "one to two mode"), or support four scanners or
less with one receiver networking mode (hereinafter referred to as "four
to one mode").
"One to two mode", the barcode data from one scanner, then send the data
to two PC at the same time; "four to one mode", barcode data from four
scanners (max) can be sent to one PC. If user has multiple scanners and
multiple receivers, user can match according to their own requirements.
For example, user has five scanners and three receivers, they can build
two groups, one is "four to one mode", and another one is "one to two
mode".
Please follow up the following steps to build "four to one mode",
1.
Open the first scanner
According the above " one on one pairing" to set the scanner
2.
3.
Match successfully, which mean the first scanner work under
networking; it is "one to one mode".
Open the second scanner, same operation as above, "one on one
4.
pairing", after match successfully; they become "two to one
mode".
Open the third scanner, same operation as above, "one on one
5.
pairing", after match successfully; they become "three to one
mode".
Open the fourth scanner, same operation as above, "one on one
6.
pairing", after match successfully; they become "four to one
mode".
Remarks: If need "two to one mode", stop at the fourth step; if need
"three to one mode", stop at the fifth step.
Please follow up the following steps to build "one to two mode",
1.
Open the first scanner
According the above " one on one pairing" to set the scanner
2.
7
Advertisement
Table of Contents
